YardPod Foundation Design Options
YardPod foundations can be built by YardPods-approved builders in the Greater San Francisco Bay Area, or Owner-built to specifications provided by YardPods.
The choice of foundation will depend on the slope of the ground and the soil conditions. It is recommended that an engineer be consulted for all except a level to moderate slope on good ground. Steep slopes will require engineering.
This is the fastest and lowest-price foundation when the ground is level and has good bearing capacity. Simply clear vegetation, lay a 6″x6″ treated lumber perimeter beam under the four sides, connect with galvanized metal connectors, drill holes in each beam and drive a galvanized metal spike into the ground to hold the beams in place. Place landscape fabric between the beams to prevent weed growth. The YardPod floor panels can be laid directly on top and is secured down to the beams.
Pre-Cast Concrete Blocks
Readily available from lumber yards, concrete blocks are an easy DIY solution. The blocks are placed on top of poured concrete, leveled and connected to the concrete. 6″x6″ perimeter beams are laid along the two sides and the YardPod floor is placed on top, all are connected.
Galvanized Metal Spikes
Widely available, metal spikes can be driven directly into the soil, or driven into a pit filled with stones. 6″x6″ perimeter beams are laid along the two sides and the YardPod floor is placed on top, all are connected.
This is the most expensive solution, but can eliminate the need for a YardPod floor. Note that a concrete floor will not be as comfortable to walk on as an insulated YardPod floor.